AmyZ
I am just fishy geek that crochets :D
Lifetime Member
Event Committee
TCMAS Member
Meeting Host 2020
Meeting Host 2022
June 2nd, 2018
This is part of the Three Tank SW MN tank tour!
PLEASE RSVP TO EACH PART YOU WANT TO ATTEND, LINKS BELOW TO OTHER MEETING SITES.
First Stop @ 12 noon - Marshall, MN - Ryan Snodgrass
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-first-of-3-stops.66406/
Second Stop @ 230pm/3pm - Okabena, MN - KJoFan
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-second-of-3-stops.66407/
Third Stop @ 6pm - Buffalo Lake, MN - Nezw0001
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-third-of-3-stops.66408/
Do you want a pm for address or do you want to post it here?
311 O'Connell St
Marshall, MN 56258
(office location)
Is there a limit to attendee's?
20
Is your meeting handicap accessible?
Yes
Will you be providing any refreshments?
Yes and some burgers if the RSVP is accurate.
Are there any specific parking guidelines?
No, lots of parking!
Do you have any pets? (this is for members with allergies)
No, please leave yours home unless needed.
Are children allowed?
Yes, not a normal meeting spot so bring a tablet.
Please provide a short description of your experience in the hobby and any tanks currently running.
I've been in this addiction for about 18yrs and have run nano mantis tanks, 30, 90, 125, 175, 210, & 300. SPS dominate, softy dominate mixed, calc reactors, fuge, no fuge, skimmer, no skimmers, VHO, T8, T5, compacts, halides, leds... I've experimented with alot.
Currently, I built out (with the help of some members and sponsors) a 300 Gal dual in-wall tank viewable on three sides on both sides of the wall. There are 20 cabinet doors on the stand. Removable yellow glass for viewing.
Will continue to have a softy dominant tank and very select SPS/LPS. There is an unconventional fish room on the other side of the hall that houses my ato/water and supplies. The rest of the equipment is under the stand.
Current equipment is a skimmer, "experimental" fuge that will likely be converted in part to frags. Radion XR30W pros, abyzz and VarioS return pumps ran in wall. Random output eductors, custom sump and steel stand. Carbon reactor, Avast swabbie on skimmer and holding tank. Full Apex, removable uv, modified high flow overflows, etc. No powerheads or closed loop.
This is part of the Three Tank SW MN tank tour!
PLEASE RSVP TO EACH PART YOU WANT TO ATTEND, LINKS BELOW TO OTHER MEETING SITES.
First Stop @ 12 noon - Marshall, MN - Ryan Snodgrass
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-first-of-3-stops.66406/
Second Stop @ 230pm/3pm - Okabena, MN - KJoFan
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-second-of-3-stops.66407/
Third Stop @ 6pm - Buffalo Lake, MN - Nezw0001
http://www.tcmas.org/forums/threads/sw-minnesota-tank-tour-third-of-3-stops.66408/
Do you want a pm for address or do you want to post it here?
311 O'Connell St
Marshall, MN 56258
(office location)
Is there a limit to attendee's?
20
Is your meeting handicap accessible?
Yes
Will you be providing any refreshments?
Yes and some burgers if the RSVP is accurate.
Are there any specific parking guidelines?
No, lots of parking!
Do you have any pets? (this is for members with allergies)
No, please leave yours home unless needed.
Are children allowed?
Yes, not a normal meeting spot so bring a tablet.
Please provide a short description of your experience in the hobby and any tanks currently running.
I've been in this addiction for about 18yrs and have run nano mantis tanks, 30, 90, 125, 175, 210, & 300. SPS dominate, softy dominate mixed, calc reactors, fuge, no fuge, skimmer, no skimmers, VHO, T8, T5, compacts, halides, leds... I've experimented with alot.
Currently, I built out (with the help of some members and sponsors) a 300 Gal dual in-wall tank viewable on three sides on both sides of the wall. There are 20 cabinet doors on the stand. Removable yellow glass for viewing.
Will continue to have a softy dominant tank and very select SPS/LPS. There is an unconventional fish room on the other side of the hall that houses my ato/water and supplies. The rest of the equipment is under the stand.
Current equipment is a skimmer, "experimental" fuge that will likely be converted in part to frags. Radion XR30W pros, abyzz and VarioS return pumps ran in wall. Random output eductors, custom sump and steel stand. Carbon reactor, Avast swabbie on skimmer and holding tank. Full Apex, removable uv, modified high flow overflows, etc. No powerheads or closed loop.
[RSVP=66406]Click here to add/change RSVP[/RSVP]
AmyZ - 2
Bridget Albright - 1
livestuff - 1
RSnodgrass - 3 - Please try to keep RSVP's current for the hosts.
Total: 7
Last edited:
