Banner image

Cheezy's Eurobraced 210g SC aquariums (1 Viewer)

I had a scare this weekend. My KHG had a faulty float switch, so I had to send it in for repair. In doing that, all the small hoses had to be detatched. the "SW in" tubing sits in the sump. I was careful to place all the hose ends above the sump to prevent back flow and drain them. A few hours later, I came back to 2 inches of water in the cabinet. The SW hose had fallen down and since there is a little filter/check valve, it didn't drain.I pulled all of the hoses out and shop vacced the trough in the cabinet. Kudos goes out to @jlanger for making an amazing stand! The thing was damn near water tight.There was a little moisture on the carpet near the cabinet, but minimal.

I monitored it throughout the night to confirm that was the only problem. I had shut down my ATO to see if I was losing any more. I went back down a few hours later and noticed another puddle but not nearly as large.The water level was down. I was understandably nervous at that point. I had a game plan in place if I the sump had popped a seam, but I was not looking forward to spending the day dealing with it. On my next check I noticed that my skimmer wasn't generating nearly the heavy bubbles as usual. It was just some salt in the venturi. Sump level went back up, and I was able to get some sleep.

Thankfully the tank is large so the 2-3 gallons of RO/DI water didn't even budge my salinity.
Now I big challenge is tuning my dKH until the KHG comes back. We are headed to Beijing in a couple weeks, so hopefully it gets back by then.
 
There was a casualty in all of the excitement of last week....my ATS. I must have unplugged the pump when I was clearing the cabinet out.
I came back to this a few days later.
dry ATS.jpg
I took this as a sign that I should try the old chaeto ball method again, at least until I complete V2 of the algae scrubber. I only had a baseball sized chunk of chaeto that had been quarantined. Hopefully it grows quickly!
 
Now I big challenge is tuning my dKH until the KHG comes back. We are headed to Beijing in a couple weeks, so hopefully it gets back by then.

Does KHG report how much Alk it adds per day? So is it just a matter of setting dosing to what KHG has been doing? Or do you have to start from scratch at guessing dosing levels?
 
It does report how much it doses, so that was a good starting point. They have it setup only for sodium bicarbonate, so I had to do the conversion. I'm basically at the right dosage now.

BTW cypho, the pH probe that came with it was just a single junction so the lab grade BRS probe would be a great replacement. I thought they might actually use a lab grade probe, but I was mistaken.

Sent from my Pixel using Tapatalk
 

Users who are viewing this thread

Back
Top