Looking good.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Nice!Successful evening that our fellow OCD (Obsessive Cord Disorder) members would be proud of!
Everything is rebundled, zip tied with matching zip ties to the cords AND facing the same way no less.
View attachment 41400
View attachment 41401
Living dangerously after opening a cord management channel attached underneath the stand. Should have went with a 2"x2" channel instead of 1"x2" though.
View attachment 41399
Also moved my AWC pumps to a different location to free up space and clutter under the stand. Then fixed the water lines, updated programming, etc.
I used the included wall mount plates. On the modules and power supplies I used velcro or the intense double sided foam tape. The foam part is key to get a good connection.Nice!
How did you attached the Apex outlets to the ceiling of your stand? Those little black pieces? I use heavy duty velco but always comes undone due to humidity

@Mordim gave me a good idea I hadn't bothered to consider. I put a second ehiem auto feeder and feed tube mount in my sump full of Reef Chili.
It's more than controllable enough to adjust for the feed amount and I'm never around at lights out so it feeds at the right time. Only issue is he said it clumps after a bit so once a week or so it needs to be broken up.
I do need to find a better mount location though or extend the tube so the feeder doesn't go underwater if the pump shuts off.
View attachment 42539
Look at that handy eheim feed tube!@Mordim gave me a good idea I hadn't bothered to consider. I put a second ehiem auto feeder and feed tube mount in my sump full of Reef Chili.
It's more than controllable enough to adjust for the feed amount and I'm never around at lights out so it feeds at the right time. Only issue is he said it clumps after a bit so once a week or so it needs to be broken up.
I do need to find a better mount location though or extend the tube so the feeder doesn't go underwater if the pump shuts off.
View attachment 42539
Best suggestion ever, love it, thanks!Look at that handy eheim feed tube!![]()




LOL.. pixel phone and a polyp labs orange filter (at night anyway), daytime seems to depend on the coral quite a bit.Amazing photos! I'll have to talk you into giving me lessons.
Can plug into Apex directly or Break Out Box.
I'm just cutting the plug off to wire into the BOB as a switch unit. Some of my devices I'll wire in line as there are multiple ways to trigger the set switch that way.Just for clarification, Harry's switch boxes replace a break out box, they don't plug into a break out box. The switch box has the same DIN8 connector as the breakbox and plugs into an available I/O port of the apex head unit or PMx module (I think the ASM module has an I/O port as well)

In my defense, as pictured in the first post, it doesn't plug into the break out boxI'm just cutting the plug off to wire into the BOB as a switch unit. Some of my devices I'll wire in line as there are multiple ways to trigger the set switch that way.

LoL you were just keeping it easy for everyone!In my defense, as pictured in the first post, it doesn't plug into the break out box![]()